Sears 113.241591 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
When “WIDTH OF RIP”
is 6 in. and WIDER use vour
RiGHTHandtofeedthe workpiece
until it is clear of
the table
Use LEFT hand
only
to guide the workpiece do
hot FEED the workpiece with the left hand. '
When WIDTH OF RIP is NARROWER than 2 in„ the
push stick CANNOT be used because fD^uard will
interfere . , . USE the AUXILIARY FENCE/WORK
SUPPORT and PUSH BLOCK.
Attach Auxiliary Fence/Work Support to rip fence
with two “C" clamps.
34
Advertising