Sears 831.15403 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
32. Wrap the Ab Cable (72) over a “V”-pulley (40).
Attach the “V”-pulley, a Cable Trap (49), an M10
Washer (116), and two Full Finger Guards (43) to
the Right Upright (4) with an M10 x 61 mm Boit
(90) and an M10 Nylon Locknut (114).
Make sure
the Cable Trap is oriented to hold the Cable
in the groove of the Pulley.
33. Wrap the Ab Cable (72) around a “V"-pulley (40).
Attach the “V”-pulley, a Cable Trap (49), an M10
Washer (116), and two Full Finger Guards (43) to
the Left Butterfly Arm (18) with an M10 x 61mm
Bolt (90) and an M10 Nylon Locknut (114).
Make
sure the Cable Trap is oriented to hold the
Cable in the groove of the Pulley.
34. Wrap the Ab Cable (72) around a “V”-pulley (40).
Attach the “V”-pulley, a Cable Trap (49), an M10
Washer (116), and two Full Finger Guards (43) to
the Right Upright (4) with an M10 x 68mm Bolt
(93) and an M10 Nylon Locknut (114).
Make sure
the Cable Trap is oriented to hold the Cable
in the groove of the Pulley.
35. Wrap the Ab Cable (72) around a “V”-pulley (40).
Attach the "V"-pulley, a Cable Trap (49), an M10
Washer (116), and two Full Finger Guards (43) to
the Right Butterfly Arm (17) with an M10 x 61mm
Bolt (90) and an M10 Nylon Locknut (114).
Make
sure the Cable Trap is oriented to hold the
Cable in the groove of the Pulley.