Quick reference instructions – Amana ART6002 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Quick Reference Instructions

Read “Important Safety Instructions” before using “Quick
Reference Instructions”. If there are unanswered questions,

see detailed sections of this manual.

Setting Electronic Clock

1. Verify display is flashing.

2. Press HRS + or - pad to set hours and MINS + or -

pad to set minutes.

3. Press CLOCK pad to save time-of-day.

Turning Off/On Clock Display

Press CLOCKpad until display is blank. Clock retains

time while not displayed. To turn on display, press CLOCK
pad until time-of-day displays and is not flashing.

Setting Electronic Timer

1. Press TIMER pad.

2. Press HRS + or - pad to set hours and MINS + or -

pad to set minutes.

3. Press TIMER pad again to cancel.

Resetting and Canceling Timer

To reset time when remaining time is displayed, press the

HRS + or - pad to set hours and MINS + or - pad to set

minutes until new time displays.

To cancel timer when remaining time is displayed or
signal after time elapses, press TIMER pad.

Automatic Oven Shut-off
As a safety feature, oven control automatically shuts off
oven after 12 hours of operation. This feature can be
turned on or off.

To allow oven to operate for more than 12 hours, confirm
temperature knob is in OFF position. Then, press and
hold the MINS + and - pads for approximately
4 seconds. Display will change from time-of-day and show
“OFF”.

To set oven to shut off after 12 hours, confirm temperature
knob is in the OFF position. Then, press and hold the

MINS + and - pads for approximately 4 seconds. Display

will change from time-of-day and show “ON”.

Operating Surface Elements

1. Push in and turn surface element control to desired

setting.

2. When finished cooking, turn control to OFF position.

Baking
1

.

3.

4.

Open oven door to confirm nothing is stored in oven
cavity and set racks to proper height.
To preheat oven, turn oven temperature knob to
desired temperature.

Place food in oven.

After cooking time elapses, remove food and turn
oven temperature knob to OFF.

Adjusting Factory Set Baking Temperature

1. Turn oven temperature knob to OFF.

2. Press and hold HRS + and HRS - pad for

approximately 5 seconds.

3. Immediately, press either Press HRS -t- or HRS ■

HRS + increases oven temperature by 5°F.
HRS - decreases oven temperature by 5°F.

Broiling

pad.

1

.

2

.

3.

Centerfood on broiling grid and pan, and place in

oven.
• Oven door should be opened to first stop.
Turn oven temperature knob to BROIL.
After broiling, remove food and turn oven temperature
knob to OFF.

Self-Cleaning

1. Prepare oven for self-cleaning.

2. With oven door closed, move oven door lever located

above oven door to right to lock oven door.

3. Turn oven temperature knob to CLEAA/position.

Interrupt Self-Clean Cycle

1. Turn oven temperature knob to OFF position.

2. When oven has cooled to a safe temperature,

LOCKED light flashes. Door can be unlocked and

opened.
• Do notforce door lever open. If door lever is forced,

lock can be damaged.

After Self-cleaning Cycle
Turn oven temperature knob to OFF position when
finished. After oven has cooled LOCKED light flashes.

Door can be unlocked and opened.

Pari No. 36-31851601-0
Printed in U.S.A.

0 6/98 Amana Appliances

Amana, Iowa 52204

Advertising
This manual is related to the following products: