For u.s.a. model, Features, For^anadian model i^ y – Onkyo TX-8211 User Manual

Page 2: Pour leiimodeue canadien, For european model, L attention for british model

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Thank you

for purchasing the Onkyo

TX-821 I FM Slereo/AM Receiver.

Please read this manual thoroughly before making con­
nections and operating the unit.

Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new Receiver.

Please retain this manual for future reference.

FOR U.S.A. MODEL

Features

I Power output

USA & Canadian models:

50 watts per channel, min RMS, at 8 ohms, both
channels driven from 20 Hz to 20 kHz, with no

more than 0.08% Till).

European models:

2 X 70 watts at 4 ohms, 1 kHz (DIN)

Asian models:

2

X

00 watts at 4 ohm.s, 1 kHz (EIAJ)

I Discrete output stage circuits for true high-current,

low-impedance drive

I

Costly, high-quality parts such as large power tran­

sistors, an oversized isolated transformer and heavy-

duty extruded heat sink makes it possible to accu­

rately and effortlessly drive 4-ohm s|)eakers (rare for

a receiver)

I

4 Audio inputs

I

A/B Speaker selector and outputs

I

Cassette tape dubbing capability

I’

Selective tone control

I

2-Mode APR (Automatic Precision Reception) (local/

DX, aulo/inono)

I

30 FM/AM random presets

I

Preset scan tuning

I

3 Station group presets (10 stations per group)

I

RDS with PS, 1*TY, RT, I P (European and some

other models only)

I Direct access tuning
I Motor-driven, precision volume control
I Headphone jack
I Audio mute, sleep timer (via remote)
I Battery-free memory backup
I New non-resonant feel
I New slip-free rotary volume knob
I Rl Compatible remote control

Note to CATV system installer:
• This reminder is provided to call the CATV system installer’s

attention to Section 820-40 of the NEC which provides guide­

lines for proper grounding and, in particular, specifies that the
cable ground shall be coimecied to the grounding system of the

building, as clo.se to the point of cable entry as practical.

FOR^ANADIAN MODEL i^

y

POUR LEiiMODEUE CANADiEN^ ^'

• For models having a power cord with a polarized plug.

CAUTION:

TO

prevent

electric

shock

,

ma

tch

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• Sur les modèles dont la fiche est polarisée.

ATTENTION:

pour

éviter

les

chocs

élec

­

triques

, INTRODUIRE LA LAME LA PLUS LARGE DE LA

FICHE

DANS

LA

BORNE

CORRESPONDANTE

DE

LA

PRISE ET POUSSER JUSQU'AU FOND.

FOR EUROPEAN MODEL;

Declaration of Conformity

We. ONKYO EUROPE

ELECTRONICS GMBH

INDUSTRIESTRASSE 18/20

82IIOGERMERING.

GERMANY

declare in own responsibility, that the ONKYO prrxluct de.scribed

in this instruction inanu:il is in compliance with the corresponding

technical standards such ;is EN550I3.EN5.V020.EN60555-2,

EN60065

GER.MERING.GERMANY

H. YAMAZOE

ONKYO EUROPE ELECTRONICS GMBH

r,n •■'Wf'-

-i ......

¿l ATTENTION FOR BRITISH MODEL ,

Replacement and mounting of an AC plug on the power supply

cord of this unit should be perfomied only by qualified .service

personnel.

IMPORTANT:

The wires in the mains lead are coloured in accordance with the

following code:

Blue:

Neutral

Brown:

Live

As the colours of the wires in the mains lead of this appliance may
not correspond with the coloured markings identifying the termi­
nals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the termi­

nal in the plug which is marked with the letter N or coloured

BLACK. '

The wire which is coloured BROWN must be connected to the ter­

minal in the plug which is nnirked with the letter L or coloured
RED.

IMPORTANT

A 5 amp fu.se is fitted in this plug. Should the fuse need to be

replaced please ensure that the replacement-fu.se has a rating of 5
amps and that it is approved by ASTA or BSI to BS 1362. Check

for the ASTA mark or the BSI mark on the body of the fuse.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR

THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE

SHOULD BE REMOVED AND THE PLUG CUT OFF AND

DISPOSED Of- SAFELY. THERE IS A DANGER OF SEVERE

ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13 AMP SOCKET.

If ill any doubt please consult a iiuulilled electrician.

Advertising