Recording a source – Onkyo TX-8211 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording a source
TAPC-2 MONnOfl TAPE«!
FM
AM
P
m
O
n
O
TX-8211
Recording
I
Playback
Tape dock
(TAPE-1 and/or TAPE-2)
Turntable
CD player
Please read ihe insiriiciion manuals con
cerning ihe operation of each unit.
1. Insert a blank tape into the tape deck.
2. Press the button (other than TAPE-2
MONITOR)
of
the
source
from
which you want to record.
•
When FM or AM is selected, set the
tuner to the station you want to record
from.
•
When TAPE-1 is selected, it will record
to the TAPE-2.
•
When either FM. AM, PHONO or CD
is selected, you are able to record to
both the TAPE-1 and TAPE-2.
3.
Put the tape deck in the recording
mode. Begin playing the source.
Set the proper recording level using the
controls on the tape deck used for record
ing. Also, if any controls (bass, meble etc.)
on this unit are changed during recording
and dubbing operations, the tone effects
will not change.
NOTE:
Recording from TAPE-2 to TAPE-1 is not
possible.
TX-8211
Recording
Tape deck (TAPE-2)
Playback
Tape deck (TAPE-1)
"'Tap^
1. Load the original tape in deck 1 and
the blank tape in deck 2.
2. Press the TAPE-1 button.
3. Put tape deck 1 in the playback mode
and tape deck 2 in recording mode.
20