Snow throwing patterns – Troy-Bilt 42000 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Section 4: Operation (continued)
Snow throwing patterns
Use the pattern shown in Fig. 4-12
when snow can only be thrown to one
side of the area being cleared.
Begin removing snow from the side
the snow cannot be thrown to. Direct the
discharge away from this side. When
turning the unit at the end of each pass,
rotate the discharge chute so it continues
to throw snow only to one side.
Use the pattern shown in Fig. 4-13
when throwing snow to both sides.
Change the direction of the discharge
chute only when turning at the end of
each pass.
21
Advertising