Decals – Troy-Bilt 42000 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Section 1: Safety (continued)
5. Allow the engine to cool before
storing in any enclosure.
6. Store gasoline in a cool, well-
ventilated area, safely away from any
spark- or flame-producing equipment.
7. Store gasoline only in an approved
gasoline storage container, safely out
of the reach of children.
8. Use only original equipment
replacement parts. Parts
manufactured by others could present
a safety hazard even though they may
fit on the unit.
9. Store the unit where children will not
have access to it. Always disconnect
the spark plug wire from the spark
plug to prevent accidental starting.
Remove the ignition key from the
ignition switch.
10. Check the tightness of the auger
shear bolts and other fasteners at
frequent intervals.
11. Maintain or replace safety and
instruction decals if they are damaged
or illegible. Refer to the parts catalog
for decal location and ordering
information.
12. Refer to the engine owner manual for
complete engine operation and
maintenance information.
Decals
For your personal safety and the
safety of others, there are a number of
safety message decals have been affixed
to your unit. Keep them clean and legible
at all times. Contact your local service
dealer or the factory for replacements if
any of these decals are damaged or
missing.
Refer to the separate parts catalog for
decal locations, part numbers, and
ordering instructions.