Remote panel models, Model 9042, Remote panel cables – Generac 0661-4 User Manual
Page 29: Optional accessories, Model 9043, Generac r.v. generator
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPTIONAL ACCESSORIES
A plug-in receptacle (Figure 31) is provided on
the
gen
erator set, near the AC connection
wires.
Use this
receptacle
to
connect
an
optional
remote-mounted
start/stop panel to the generator. Installation of such a
panel will permit you to start and stop the generator
engine from any convenient location inside the vehicle.
Figure 31 — Remote Panel Plug-in Receptacle
MODEL 9043
REMOTE PANEL MODELS
■ MODEL 9042 ________________________
This remote panel (Figure 32) mounts a rocker type
start/stop
switch
and
a
“Generator
Run’*
advisory
lamp. The lamp will turn on to indicate the engine is
running.
Figure 32 — Model 9042 Remote Panel
©
lEi
R.V.
©
This panel mounts a rocker type switch, a “Generator
Run" lamp and an hourmeter (Figure 33). Use the
hourmeter
in
conjunction
with
the
periodic
mainte
nance schedule for your generator.
Figure 33 — Model 9043 Remote Panel
o
o
GENERAC R.V. GENERATOR
REMOTE PANEL CABLES
Interconnection cables are available from Generac for
connecting the optional remote panels to the genera
tor receptacle.
• To order a 10-foot long, 4-wire cable, specify Model 9045.
• To order a 30-foot long, 4-wire cable, specify Model 9046.
—
27
—