Cradlepoint CBR450 User Manual
Page 10
CRADLEPOINT
CBR450| USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 8
Factory Default Reset: You can return your router to factory default settings by pressing and holding the
Reset button. This button is recessed, so it requires a pointed object such as a paper clip to press. Press
and hold for 10 seconds to initiate reset.
3G/4G Modem Signal Strength Button: When pressed the bar LEDs indicate signal strength from the
USB or ExpressCard modems. The signal strength is shown for 10 seconds if the modem does not
support concurrent data connection and signal strength measurement. Tapping this button will toggle the
Modem Signal Strength display on and off.