Cradlepoint CBR450 User Manual
Page 89
CRADLEPOINT
CBR450| USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 87
Configuration Rule: Modem Settings
AT Dial Script: Enter the AT commands to be used in establishing
a network connection. Each command must be entered on a
separate line. All command responses must include ―OK‖ except the
final command response, which must include ―CONNECT‖.
Example:
AT
AT+CGDCONT=2,‖IP‖,‖isp.cingular‖
ATCT*99***2#
PPP Authentication Protocol: Set this only if your service provider
requires a specific protocol and the Auto option chooses the wrong
one.
Auto
PAP (Password Authentication Protocol)
CHAP (Challenge Handshake Authentication Protocol)
PPP Password: Password for PPP authentication.
PPP Username: Username for PPP authentication.
SIM PIN: PIN number for GSM modem with a locked SIM.
Access Point Name (APN): Some wireless carriers provide multiple Access Point Names that a modem can connect to.
If you wish to specify an A
PN, enter it into this field. Some examples of APN are ‗isp.cingular‖ and ―vpn.com‖. This APN
will be set in the first profile position.
LTE Connection Mode: Specify how the LTE Multi Mode modem should connect to the network.
Auto: Let the modem decide which network to use.
Auto EVDO/1xRTT: Connect to CDMA, letting the modem decide which 3G network to use. Do not attempt to
connect to LTE.
Force LTE: Connect to LTE only (do not attempt to connect to CDMA/GSM).
Force EVDO: Connect to CDMA EVDO network only.
Force 1xRTT: Connect to CDMA 1xRTT network only.