5 local networks – Cradlepoint CBR450 User Manual
Page 58
CRADLEPOINT
CBR450| USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 56
6.5 Local Networks
This section is used to configure the
settings for networks created by your
router. Note that changes made in this
section may also need to be
duplicated on devices that you want to
connect to your network(s).
For example, if you change a LAN
‘s IP
address, devices within that network will lose
connection. They will have to reconnect to the
network.
The CBR450 includes these options:
VLAN (virtual LAN)
NAT-less routing
The user can set up multiple
networks, each with its own unique
configuration.
For example, one network might be
an isolated network for guests, while
another might be the main network
with administrative access. Both of these will use the Ethernet port for connectivity, but they can be set to have separate
VLAN settings.