Cradlepoint CBR450 User Manual
Page 93
CRADLEPOINT
CBR450| USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 91
Tunnel Enabled: Enabled or Disabled.
MBR1200 Quick Connect: VPN tunnels in the CBR450 have more choices than they do in the MBR1200, so it is more
complex to configure. Check this box to simplify setup by streamlining your options.
7.6.2
Page 2: Networks
Local Network: The Network IP address and the Subnet Mask
define what local devices have access to or can be accessed
from the VPN tunnel. The CBR450 will automatically fill in the
values for your network, but you can change the values to limit
the tunnel to only some of the devices in your network.
NOTE: The local network IP address must be different from the remote
network IP address.
Remote Network: Enter the remote Gateway's IP address or
fully qualified domain name (my.domain.com). It is
recommended you use a dynamic DNS host name instead of the
static IP address. By using the dynamic DNS host name updates
of the remote WAN IP are compensated for while connecting to
a VPN tunnel.
Enter the Network IP address with the Subnet Mask to define
the remote network subnet that the local devices will have
access to.
NOTE: The remote network IP address must be different from the local
network IP address.