Beko 32WLA530HID - Manual (Page 17)

Picture Setup
Q
3
1/
Brightness 50---------- :-------------------
Contrast 30-i-----------------------------
Colour 50------------ i------------------
Sharpness 6------------:------------------
Noise Reduction 4 Soft &
Picture Smart «1 Soft P
Picture Format 4 Letterbox P
Access picture sub-menu by pressing
the ( q ) button on your remote control
Use ('C£>)/(C5>) buttons to select Picture
sub-menu and enter by pressing OK or
(<3>) button. Select the setting function
you want using the Up and down buttons
(<S>) or (C£>) and adijjst their levels
with the right and left p)/(l^) buttons.
The picture brightness, contrast, colour
and sharpness levels can all be adjusted
according to your desire. The changes
you make in the picture settings will be
automatically stored as your personal
settings.
Noise Reduction: Using this feature you can
reduce static by selecting off. Soft, Sharpest or
Sharp function.
Smart Picture: This is one of the pre-installed
I
and unchangeable features, to select this
feature use your (v)/(^) buttons. Soft,
Natural and Rich are constant values.
User are the values you stored into
memory. Furthermore, you can select
one of the non-adjustable default settings
injhe memory (Picture Mode) by pressing the
"O" button on your remote control.
Picture Format: This feature enables you to
watch any broadcast image in the format
you desire. These are; Auto, 16:9 (no
option on sample). Letterbox, 14:9,
4:3, and Zoom. You can do the
selection without entering the picture
menu by using the "O" format selection
button.
Colour Tint: When NTSC video is used in
SCART, Colour Tint settings can be made. If you
do not use such a video type the Colour Tint
choice is not seen in the menu. If NTSC video
is used in SCART this choice becomes active
and can be seen in the menu.
Depending on the type of broadcast being
transmitted, programmes can be viewed in a
number of formats. Press the "'-4 " button
repeatedly to select between
Zoom, Letterbox,
Auto, 16:9,14:9, and 4:3.
Please note: Whenever the MENU button is
pressed the picture size setting will change while
the menus are ON the screen. This is to ensure
that the menus do not overlap the edges of the
viewable area.
Zoom
To fit* the screen by streching the image •
horizontally, holding the correct
proportions at the centre of the image.
Some distrotion may occur.
Letterbox
Use this setting when watching a
widescreen DVD, widescreen video tape
or a 16:9 broadcast (when available).
Due to the range of widescreen formats
(16:9, 14:9, 20:9 etc.) black bars may
be visible on the top and bottom of the
screen. Letterbox format removes black
bars or makes them less visible.
Auto
Some channels may send automatic
screen formatting. If you wish to switch
automatically to this format select Auto.
The TV will automatically switch to the
detected format from the scart inputs or
broadcast.
16:9
Use this setting when watching a
widescreen DVD, widescreen video tape
or a 16:9 broadcast (when available).
Due to the range of widescreen formats
(16:9, 14:9, 20:9 etc.) black bars may
be visible on the top and bottom of the
screen.
14:9
This is the movie format.
4:3
Use this setting to view a 4:3 broadcast.
Using the special functions to change the size of the displayed image
(i.e. changing the height/width ratio) for the purposes of pubfic
display or commercial gain may infringe on copyright laws.
-
17
-