Beko 32WLA530HID - Manual (Page 18)

Features Menu (Analogue)
A
1/
M
The Feature menu is accessed via the
menu button. The feature menu is selected
by using the up-down buttons and use
the (5.5) button or the Right side button,
to enter.
You can select the headings you want
to adjust in this menu by using the
(■C3I>)/(Ci2>) buttons.
Features Menu (Digital)
The Feature menu is accessed via the menu
button. The feature menu is selected by using
the up-down buttons and use the OK button or
the Right side button, to enter. You can select
the headings you want to adjust in this menu
by using the ( ) or (v'r>)buttons.
•G
1/
Menu Language
:2 Output
Lii dutiA-ux; « 1.
i>» .-.ji Sub. :!»
■•i V t'di J«.; w
Carrgwjn intefeK» Na Vvila:? 3
Sr>ft.v>vs Jvÿrjj:: »
MLNJ’ B ä .« LX:! v .»L:- ÎV
Deutsch Dansk
Français Deuluh
Italiano Suomi
Espanul PdskI
Portugijós CAkr)v kc
Türke« PvcCK,1,t
Svnnska Slovonsclnn
ÖWky Magyar
HrvatskI ' u'
Romàna
Slovensko
Panel Lock: If you switch this feature On, the
buttons on the
Tv
(except on/off) will not work
when the TV is in Stand-by mode or on.
Language: Select the menu lan^age line and
press or right ('?) button. The
screen will show the menu languages.
Select the desired language using the
Ijp-dgwn (OO) or (-CS^jand Right-left
(v)/(i/) buttons. Press the (@)) button
again. Your television will now feature
the language you have chosen for all
the adjustment indicators and menus.
Scart2 output: This features enables you to
select the video and audio output source to your
recording equipment.
Either connect the scart input of recording device
to the TVs Scartl source (marked AVI on the unit
and select Scart 1 in Scart2 output option.
Or connect the AV (PHONO) Ir^ut of recording
device to the TVs AV out (PHONO) connection and
select AV in Scart2 output option.
Connect the output of your recording device as
you find appropriate from connecting external
equipment chapter.
To record from the output set recorder to record
from its correct input source, you may need to
refer to recording devices User manual.
The recording device will record what analogue
or digital channel you are viewing. Note that if
you attempt to view output of recording device
while the recording devices is set to the input
source from the tv you will probably experience
interference on your Tv screen.
Note: If pip mode is active while recording, the
window selected will be recorded. If you select
the other PIP window (using up/down buttons)
during record the output is automatically switched.
On/Off Timer: Your television features
an automatic stand-by feature which can
be enabled for any time period up to 12
hours and 59 mins by using the numeric
buttons. If you want your television to
automatically go into stand-by, please
select the off fimer line. Select the desirqd
duration with the Right (<>) and left (v)
button.
At the end of the choosen duration the screen
will show a 30 second countdown before
switching off the screen and entering into stand­
by. To cancel the automatic stand-by; set off
timer to 00:00.
The setup menu is opened via the menu button.
The feature title is selected by means of the №-
down button. Using the (^.iV) button or the (5)
button, the feature menu is accessed. The On/off
timer tab is selected and its menu is opened via
the right button. In the Off-timer tab, the sleep
time is set via the right-left side buttons and the
time to elapse until it restarts after being turned off
is set on the On-timer tab. In the On-timer list title,
it is decided whether the pawer-on will be done
by the digital TV or the analogue TV.
-
18
-