Connecting a dvd/video player, La scart, Dvia phono lead – Beko 32WLA530HID User Manual
Page 25: Ia phono lead and s-video socket
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting a DVD/Video player
DVD/Video Diagram
la SCART
Make sure the TV and DVD player are both
switched off.
Plug one end of the SCART lead (not supplied)
into the back of the DVD player and the other
end into the SCART socket on the back of the
TV.
Switch on the DVD and the TV.
(DVia PHONO lead
Make sure the TV and DVD player are both
switched off.
Plug one end of the PHONO lead into the video
and audio out sockets on the back of the DVD
player and plug the other end into the video and
audio in sockets of the TV.
ia PHONO lead and S-Video
socket
You can also connect it through the S-Video
socket of the TV.
Plug the S-Video plug into the S-Video socket
and the audio leads into the audio sockets.
AV Outputs
You can connect any device which has Phono
inputs via Phono Video and Audio Out Connectors
to the back of your TV set using correct AV cable
(not available with the set).
The current view from tuner or AV input seen on
the main screen except S-VHS, PC or DVI (which
is optional) is available as picture and sound
signals at Phono Video/Audio outs.
Scart sockets at the back of your TV always give
the signals of selected programme from the set
Tuner.For further information see Scart2 output
on page 1 8.
| i
®-"l
®s
® 5
®1
Si
mu
lu
0
®n
®U
®iJ
®n
®3
21 pin SCART
connector
I
to 21 pin SCART
input on TV
&
DVD
I3l 1-—::
DVD
-
25
-