Installation of the cabinet, Instaliation instructions – Bryant 463AAC008BA User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
instaliation instructions
8. Installation of the cabinet
(Model 463AAC005BA and 463AAC008BA)
A Align one hole in the bottom of the cabinet with
one hole in the bracket assembly. Secure the
cabinet to the bracket using a 1/4" screw provided
Repeat the same procedure on the opposite side
of the cabinet See (Hg 17}
B. Ensure the T" shaped mounting channel is
positioned in front of the sash The "U" shaped
channel on the bottom of the cabinet should
be positioned in the track provided on the bracket
assembly Pull the window down until it rests just
behind the front of the "L" shaped mounting channel
See (Fig- 18)
C Check to make sure that the cabinet is slanted
slightly downward on the outside If necessary,
re-adjust support bracket as shown in {Fig 11}
Fig 18
11