Audiovox DT921C User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

4. Btercise cam in handling bactofies

in order not to short the battery

with conducting materials such as

rings, bracelets, and kays. The

battary or conductor may overheat

and cause bums.

l№Bsge(BgQjggggg^

SPARE SATTERY CHARGER

The OT921C has a built-in spare

BatteryCharger, which is focaledirtihe

cradle of the Base Unit.

;atr№ora^^№atee^®S^™nt^1n®

Installation

Remove the Spare Battery charger

cover by pressing the release tab and

lifting up.

Place a battery pack in the Spare

Battery charger. Make sure the metal

charging contacts on the underside of

the battery pack are aligned with the
charging contacts in the Spare Battery

charger.

Power Backup

When a Spare Battery pack Is instatted
In the Base Unit, the ALfDIOVOX

DTSato uses this battery pack to

provide operational backup

In

case of

a power failure, if you have a fully
charged battery pack in the Spare

Battery pack charger and there is a
power outage; you will still be able to

place and receive calls for up to five

hours.

Replacing a

Drained

Handset

bat­

tery

The Spare bahery pack can also be
used to replace a drained Handset
battery pack to ensure unintermpted

use. Be sure to put the drained battery
pack in the Spam Battery charger for

recharging

Please note that the Spare Battery

compartment charges at a slower rate
than a battery pack charging in the

Harvdset. it takes 34 hours to fully
charge a battery pack in the Spare
Battery charger.

'E

l

11

><1

iMVlrtir. FM mi«

rf

Advertising