Audiovox DT921C User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Check for a dial tone. After the battery
pack is charged, rotate the Base Unit
antenna to an upright position. Pick up
the
Handset
and
press
TALK
"PHONE ON" will appear on the LCD,
and you will hear a dial tone. If not,
see 'IN CASE OF DIFFICULTY’ on
page 33.
,
nil in the telephone number card on
the base unit.
CAUTION:
1.
Never install telephone wiring
during a lightning storm.
2. Never install telephone jacks in
wet locations unless the jack is
specifically
designed
for
wet
locations.
3. Never touch uninsulated telephone
wires or terminals unless the
telephone
line
has
been
disconnected
at
the
network
interface.
4.
Use caution when installing or
modifying telephone lines.
13
d[92t.p6]
1998/6/22. PM 07:16