Audiovox DT921C - Manual (Page 24)

Storing Memory (Speed) Dial
numbers '
To program a apesd dial location, do
the follovvlng:
W'lth the phone OFF, enter the
telephone number you wish to
store. [20 Qigrts Majfimum],
Enter program mode by pressing
PROG. The display wilt show the
following:
PRUQRHr'1
L0CflTIQH__
Enter the memory location (01..20]
you wish to store the number in.
As soon as the second memory
location digit is entered, the unit
will emit a happy tone (a short
series of beeps) to corrfirm
successtul programming and ejdt
program mode.
|[ Аплтш.
jTOHiNd S peed diai .
МЦМВСП
04. YOC4 PHOME
ШМвЕЯ
PRESS iS>
PRESS ijOCAinON [C1.20^
:
1 <9 9 9
If programming is unsuccessful the unit
will display:
PROiBRHMM IHG
INCOMPLETE
Unsuccessful programming can result
from not correctly completing the
programming sequence. For example,
if after entering a number on the LCD
and entering program mode, the OFF
key were pressed instead of entering
a
valid memory location, the
'PROGRAMMING INCOMPLETE'*
message would appear. If this
message appears, simply repeat the
programming sequence.
24
л Til г*
^§Ь
siisw. iTitj AM