Aiwa AV-X200 - Manual (Page 5)

CONNECTING SPEAKERS 0 POSITIONING THE SPEAKERS
Connect front speakers (system A and B), a center speaker and
surround speakers to the unit.
Connect the front speaker cords to the FRONT SPEAKERS
terminals, the center speaker cord to the CENTER SPEAKER
terminals and the surround speaker cords to the SURROUND
SPEAKERS terminals.
For more powerful bass, connect a sub woofer with a built-in
amplifier to the SUPER WOOFER <1 jack.
Front speakers
Position the speakers to make the most of the Dolby Pro Logic
or DSP effect (see “DOLBY PRO LOGIC”).
(/}
z
O
tr
s
lU
cc
Q.
(a) Front speakers
(g) Center speaker
Position in the center of the two front speakers. In addition,
position on or below the TV set, if connecting a TV set to the
unit.
(e) Surround speakers
Place the surround speakers directly to the side of or slightly
behind the listening area. Align them horizontally, about 1
meter (3.2 feet) above ear height.
• No sound is heard from the center and surround speakers when
the Dolby Pro Logic and DSP are set to off.
• Sound is heard from the center speaker only when the Dolby
Pro Logic is set to on.
• Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in the SPEAKER(S)
terminals.
• Be sure to use the speakers of specified ohms.
• Do not leave objects generating magnetism near the speakers.
• When using a sub woofer, select the speaker system A (see
page 6). Otherwise no sound can be heard from it. ENGLISH
4