Graphics subsystem, 1 introduction, Chapter 6 graphics subsystem – Compaq 4000N User Manual
Page 129: Chapter 6 graphics subsystem 6.1 introduction
Technical Reference Guide
Compaq Deskpro 4000N and 4000S Personal Computers
First Edition - September 1997
6-1
Chapter 6
GRAPHICS SUBSYSTEM
6.
Chapter 6 GRAPHICS SUBSYSTEM
6.1
INTRODUCTION
This chapter describes the graphics subsystem. The graphics subsystem is integrated onto the
system board and operates as a PCI peripheral device. Topics covered in this chapter include:
♦
Subsystem overview (6.2)
page 6-1
♦
S3 Trio64V2/GX-based subsystem (6.3)
page 6-2
Table 6-1 provides an overview of the graphics subsystem.
Table 6–1. Graphics Subsystem Comparison
Table 6-1.
Graphics Subsystem Overview
Graphics Controller:
S3 Trio64 V2-GX
Graphics Memory:
2 MB SGRAM
Maximum Resolution:
1280x1024 w/256 colors @ 85 Hz
The standard graphics controller used in the Deskpro 4000N/4000S Series is a PCI peripheral
that can be identified by software reading the “Vendor ID” and “Device ID” words in PCI
configuration address space locations 00h and 02h respectively. The values are as follows:
Vendor ID
Device ID
Graphics ASIC
System
5333h
8901h
S3 Trio64V2-GX
Pentium MMX-based
????h
????h
Matrox Cyclone
Pentium II-based