C.3 scanner description – Compaq 4000N User Manual

Page 188

Advertising
background image

Appendix C Keyboard

Compaq Personal Computers

Changed - November 1996

C-14

COM Port
(System Unit)

Analog
Video
Data

Motor Cntrl.

Serial Data

Clocks & LED

Cntrl.

Digital Video Data

24 VDC

Keyboard Unit

C.3

SCANNER DESCRIPTION

The scanner keyboard, available as an option, integrates a scanner with a SpaceSaver Windows
’95 keyboard, providing the ability to scan hardcopy looseleaf documents for faxing or electronic
storage. The scanner provides resolutions up to 400 dpi and 256 shades of gray and outputs
through a standard serial interface to the system unit. Using optical character recognition (OCR)
support software, printed textual data can be converted into editable files.

Operation of the scanner starts automatically when a sheet is inserted into the Contact Image
Sensor (CIS). A button on the left side of the keyboard allows then operator to open a menu, halt
scanning in progress, or invoke a serial port test. Figure C-9 shows a block diagram of the key
scanner elements.

Figure C–9. Scanner Elements, Block Diagram

The Contact Image Sensor (CIS) and paper drive unit handles the hardcopy input. As each sheet
is placed into the input slot, the sheet activates the mechanism and is drawn through and scanned
by an LED illumination/photodiode sensor array. The drive motor provides 96 steps per
revolution (3.75 degress per step) and is geared for 0.005 inch document movement per step for a
resolution of 200 dpi. Half-stepping provides 400 dpi vertical resolution.

An analog video data stream is developed and routed to the Digital-to-Analog (D/A) Processor
for conversion to digital video data that is routed to the Digital Processor. The Digital Processor
provides most of the control of the scanner operation. A 32-KB RAM provides storage of
executable code, pixel-to-pixel correction values, image processing line/diffusion data, and
transmission data buffering.

The scanner elements are powered from an external 24 VDC power supply. Internal components
use +5, +9, and -12 VDC.

Digital

Processor

CIS

and Paper Drive

M64290FP

Analog

Processor

32 KB

RAM

24 VDC

Power

Supply

Advertising
This manual is related to the following products: