Overheating protection – Beko HII 64400 AT User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Induction hob is equipped with

superior safety systems that wili

provide you maximum usage safety.

[H Your hob can be equipped with

induction cooking zones with a

diameter of 145,180, 210 mm
depending on the model. With

induction feature, each cooking

zone detects the diameter of

each vessel placed on them.

Energy builds up only where the

vessel contacts with the cooking
zone and thus, minimum energy

consumption is achieved.

Operation time constraints

The hob controi is equipped with an

operation time iimit. When one or more
cooking zones are left on, the cooking

zone wiil automaticaily be deactivated

after a certain period of time (see

Table-1). If there is a timer assigned to

the cooking zone, the timer display will

also turn off later.
Operation time limit depends on the
selected temperature level. Maximum
operation time is applied at this

temperature level.

The cooking zone may be restarted by

the user after it is turned off

automatically as described above.

Table-1: Operation time limits

Temperature

level

Operation time limit -

hour

0

0

1

6

2

6

3

5

4

5

5

4

6

1.5

7

1.5

Temperature

level

Operation time limit -

hour

8

1.5

9

20 minutes

P (Booster)

5 minutes (*)

(*) The hob will drop to level 9 after 5
minutes

Overheating protection

Your hob is equipped with some

sensors ensuring protection against
overheating. Following may be
observed in case of overheating:

Active cooking zone may be
turned off.

Selected level may drop. However,

this condition cannot be seen on
the indicator.

Overflow safety system

Your hob is equipped with overflow

safety system. If there is any overflow

that spills onto the control panel,

system will give error and the hob will

be automatically turned off.

Precise power setting
Induction hob reacts the commands
immediately as a feature of its

operating principles. It changes the

power settings very fast. Thus, you can
prevent a cooking pot (containing

water, milk and etc.) from overflowing
even if it was just about to overflow.

Operating noisy

Some noises may arise from the

induction hob. These sounds are
normal and a part of induction cooking.

Noise becomes prominent in high

temperature levels.

Alloy of the saucepan can cause

noise.

21 I EN

Advertising
This manual is related to the following products: