Installation and connection, Electrical connection – Beko HII 64400 AT User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
min.
Installation and connection
• The product must be installed in
accordance with all local gas and
electrical regulations.
m Risk of broken glass!
Do not put the ceramic hob down
on a corner or edge.
Electrical connection
Connect the product to a grounded
outlet/line protected by a fuse of
suitable capacity as stated in the
"Technical specifications" table. Have
the grounding installation made by a
qualified electrician while using the
product with or without a transformer.
Our company shall not be liable for any
damages that will arise due to using
the product without a grounding
installation in accordance with the
local regulations.
Risk of electric shock, short
circuit or fire by unprofessional
Installation!
The appliance may be connected
to the mains supply only by an
authorized qualified person and
the appliance is only guaranteed
after correct installation.
Risk of electric shock, short
circuit or fire by damage of the
mains lead!
The mains lead must not be
clamped, bent or trapped or
come into contact with hot parts
of the appliance.
If the mains lead is damaged, it
must be replaced by a qualified
electrician.
Connection must comply with
national regulations.
The mains supply data must
correspond to the data specified
on the type label of the product.
9 I EN