Beko HII 64400 AT User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
•
Make sure that the product
function knobs are switched off
after every use.
•
Vapour pressure that build up due
to the moisture on the hob surface
or at the bottom of the pot can
cause the pot to move. Therefore,
make sure that the oven surface
and bottom of the pots are always
dry.
•
Hotplates of your oven are
equipped with "Induction"
technology. Your induction hob
that provides both time and money
savings must be used with pots
suitable for induction cooking;
otherwise hotplates will not
operate. See.General information
about cooking, page 14, selecting
the pots.
m As induction hobs create a
magnetic field, they may cause
harmful impacts for people who
use devices such as insulin pump
or pacemaker.
[H Product must be installed by a
qualified person in accordance
with the regulations in force.
Otherwise, the warranty shall
become void.
Intended use
This product is designed for domestic
use. Commercial use is not admissible.
"CAUTION: This appliance is for
cooking purposes only. It must not be
used for other purposes, for example
room heating."
The manufacturer shall not be liable for
any damage caused by improper use
or handling errors.
Safety for children
•
Electrical and gas products are
dangerous to children. Keep
children away from the product
when it is operating and do not
allow them to play with the
product.
•
Accessible parts of the appliance
will become hot whilst the
appliance is in use and until the
appliance has cooled, children
should be kept away.
•
Do not store any items above the
appliance that children may reach.
•
The packaging materials will be
dangerous for children. Keep the
packaging materials away from
children. Please dispose of all
parts of the packaging according
to environmental standards.
Safety when working with
electricity
Defective electric equipment is one of
the major causes of a fire at homes.
•
Any work on electrical equipment
and systems may only be carried
out by authorised and qualified
persons.
•
In case of any damage, switch off
the product and disconnect it from
the mains. To do this, turn off the
fuse at home.
•
Make sure that fuse current is
compatible with the product.
7 I EN