2 connect the supplied antennas, 3 connect the ac cord to an ac outlet – Aiwa CX-ZL10 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PREPARATIONS
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord.
There are no difference between the front speakers. Both
speakers can be connected as L (left) or R (right).
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120
V
AC. Check that the rated voltage matches your local voltage.
1 Connect the right and left speakers to the main
unit.
Connect the right speaker cord to
SPEAKERS R
terminals,
and left to
SPEAKERS L
terminals.
The speaker cord with the white stripe should be connected
to O terminal and the black cord to O terminal.
2 Connect the supplied antennas.
Connect the FM antenna to
FM 75
fl terminals and the AM
antenna to
AM LOOP
terminals.
AM antenna
FM antenna
3 Connect the AC cord to an AC outlet.
• The game Demo will begin when the AC cord is plugged
into an AC outlet. See page 7 "Game Demo” for details.
To be continued on page 6.
AM antenna
FM antenna
4
ENGLISH