Aiwa CT-FX729M - Manual (Page 11)

TAPE PLAYBACK
DIR
..
!
t
f(rip
II "-ilE
1
Press OPEN to open the front panel
and insert a cassette.
Playback starts in the direction that the unit
piayed back previously.
2
Close the front panel.
Tape running indicator
C)TTT ..
3
Adjust the volume with +/—.
Notes
• If a cassette is aiready inserted, press DIR to
start playback.
• Be sure to close the front panel after inserting or
ejecting a cassette.
Press the following buttons to operate tape
transport.
To do this Press this button
Eject the cassette
0
Change the playback
side
Stop fast-forwarding or
rewinding and resume
playback
Fast-forward either side
of the tape
Rewind either side of
the tape
(^EW
Stop the tape and turn
the unit off
(jiuT^
(for more than
2 seconds)
• At the end of the tape in Fast Forward mode, the
other side of the cassette will start playing
automatically.
• At the end of the tape in Rewind mode, the same
side will start playing automatically.
Direction indications
FUH
REi'
Displayed when the upper side of the
cassette is being played.
Displayed when the lower side of the
cassette is being played.
Tape transport display
When you start tape playback, the transport
display indicates the tape movement.
Upper side; During playback,
fast-fowarding
Lower side: During rewinding
□
—1»
4-
Lower side: During playback,
fast-fowarding
Upper side; During rewinding
During fast-fonwarding or rewinding, the transport
display accelerlates.
Before turning the ignition off
Be sure to eject any cassette from the unit before
turning the ignition off.
continued
ENGUSH
10