Specifications, Radio section (fm), General – Aiwa CT-FX729M User Manual
Page 18: Tape section, Audio section, Cd/md in input
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIFICATIONS
RADIO SECTION
(FM)
Frequency Range:
87.5 MHz - 108 MHz
(100-kHz steps)
87.5 MHz-108 MHz
(50-kHz steps)
Usable Sensitivity:
12.7 dBf
50 dB Quieting Sensitivity:
17.2 dBf
IF Rejection:
80 dB
Frequency Response 30 Hz - 15,000 Hz
S/N Ratio:
63 dB
Stereo Separation:
35 dB at 1
kHz
Alternate Channel Selectivity:
70 dB
Load Impedance'
Tone Control:
GENERAL
Power-Supply Voltage:
14.4 V (11 to 16 V allowable),
DC, negative ground
4Q
Bass ±10dBat100Hz
Treble ±10 dB at 10 kHz
Preamp Output Voltage (load impedance):
CT-FX729M: 4 0 V (10 kQ)
CT-FX719: 2.2V(10k£2)
Installation size:
182 (W) x 53 (H) x 155 (D) mm
(7 V4(W)
x
2 Vs(H)x6 Vs(D)
inches)
Accessory supplied: Carrying case (1)
•Specifications and external appearance are
subject to change without notice due to product
improvement.
Capture Ratio
(AM)
Frequency Range.
Usable Sensitivity:
3dB
530 kHz-1,710 kHz
(10-kHz steps)
531 kHz - 1,602 kHz
(9-kHz steps)
30 pV (30 dB)
TAPE SECTION
Tape Speed:
S/N Ratio'
4.8 cm/sec. (1 % ips)
50 dB
Frequency Response: 40 Hz - 14,000 Hz
Stereo Separation:
FF/REW Time-
40 dB
95 sec. (C-60)
AUDIO SECTION
Max. Power Output:
40 W x 4 channels
CD/MD IN input
Input sensitivity (load impedance)
CD/MD IN:
500mV(10kfl)
17
ENGLISH