Sound adjustments, C. < ni, I pe – Aiwa CT-FX729M User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TAPE PLAYBACK
SOUND ADJUSTMENTS
Switching modes
When the unit is in Radio or CD Changer Piay
mode, inserting a cassette switches the unit to
Tape Play mode automatically.
To prevent tape probiems
Before inserting a cassette into the unit, make
sure that there is no slack in the tape. If necessary,
take up the slack by inserting a pencil into the
spindle hole and winding.
Tapes of 90 minutes or longer are extremely thin
and easily deformed or damaged. They are not
recommended.
2
1
Press SEL to select the mode that you
wish to adjust from; VOL (volume),
BASS
(bass),
TRE
(treble),
BAL
(balance) and FAD (fader).
The following indications appear in cyclic
order.
c.
< ni
.
I‘ UL
•I PE"*
SRL'^FHjj"
If you do not proceed with step 2 within 5
seconds, the selected mode is canceled, and
the indication returns to the current source
mode.
Press +/— to adjust the level.
Press and hold either button to change the
level rapidly.
—
+
n ni
H IJI-
Decreases the
volume level
Increases the
volume level
TIOCC
Xin
Decreases the
bass level
Increases the
bass level
TRE
Decreases the
treble level
Increases the
treble level
W\L
Decreases the
level of the right
speaker(s)
Decreases the
level of the left
speaker(s)
C G T(
\
njj
Decreases the
level of the front
speakers
Decreases the
level of the rear
speakers
Without selecting any mode with SEL, only
the volume level can be adjusted by pressing
+/-.
MUTE button
Press this button to temporarily lower the volume.
Press it again to restore the previous volume.
1 1
ENGLISH