To add index marks during recording, To restore stereo recording, Monaural recording – Aiwa CSD-MD5 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RECORDING FROM THE RADIO OR EXTENDED RECORDING -
A CD MANUALLY
MONAURAL RECORDING
This section expiains how to record from the radio or a CD
from a point selected manually.
1
2
Insert a recordable MD into the disc drive with
the label side up and in the direction of the
arrow.
Prepare the source to be recorded.
To record from the radio, press RADIO/BAND and
tune in a station.
To record from a CD, press CD ►!! to select CD
function and load a CD. Then select the track that you
want to record with JOG DIAL or!
Press REC.
The unit enters the standby mode and waits until the
recordable remaining time is displayed.
Remaining recordable time of the MD
4
Press MD ►!! to start recording.
5
Press ■ STOP to stop recording.
When recording finishes, TOC-EDIT flashes while the
data concerning the contents of the recording are
registered.
• When pressing DISP in stop mode, the remaining
recordable time is displayed for 4 seconds.
To add index marks during recording
Press ENTER at the desired point during recording.
By using the monaural recording mode, the available time
printed for recording on the MD can be doubled. In this
case, the recording is monaural.
Extended recording is applicable when recording from the
radio only.
7
2
3
4
Insert a recordable MD into the disc drive with
the label side up and in the direction of the
arrow.
Press RADIO/BAND* to select a band and tune
in a station.
* or RADIO FM/AM on the remote control
Press REC.
The unit enters the standby mode and waits until the
recordable remaining time is displayed.
Press MODE* repeatedly until MONO REC is
displayed.
5
6
*
or REC MODE on the remote control
Press MD ^11 to start recording.
Press ■ STOP* to stop recording.
When recording finishes, TOC-EDIT flashes while the
data concerning the contents of the recording are
registered.
* or MD ■ on the remote control
To restore stereo recording
Press MODE repeatedly until STEREO REC is displayed in
step 4.
NOTE
There may be a case where index marks are not registered
accurately.
1
6 ENGLISH