To open the operation panel, When turning the unit off with the panei open, To turn the unit on – Aiwa CSD-MD5 User Manual
Page 5: To turn the unit off, On the speaker ducts, Electric operation panel before operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ELECTRIC OPERATION PANEL
BEFORE OPERATION
The electric operation panel is simple and easy to use
enabling CD/MD search, radio tuning, MD recording/editing,
etc.
To open the operation panel
Press OPEN/CLOSE. To close the panel, press again.
When turning the unit off with the panei open
The panel automatically closes. When turning the unit on the
next time, the panel automatically opens.
NOTE
Do not use the operation panel as a handle to carry the
unit.
Do not place objects in front of the unit. It may block the
opening panel, causing malfunction.
POWER
RADIO/BAND
'll,
the unit is turned on
To turn the unit on
Press POWER.
When pressing CD ►!! or MD
and the inserted disc begins.
When pressing RADIO/BAND, the unit is turned on and the
previously tuned station is received.
To turn the unit off
Press POWER.
On the speaker ducts
• The unit should be situated so that its location or position
does not interfere with the speaker duct on each side.
Otherwise low frequency sound may be inhibited or it may
cause a malfunction.
• Take care that objects do not get inside the speaker ducts.
Otherwise it may cause a malfunction.
The instructions in this manual refer to the operations with
the panel open.
ENGLISH
5