Aiwa CT-FX929M m - Manual (Page 13)

Note
If you play a normal tape in Metal mode, the
sound will not be reproduced properly.
Music sensor function
By using this function, you can fast-forward or
rewind the tape to the beginning of the next or
current track, from which the tape playback will
resume automatically.
1. Press MS to stand by for the music sensor
function. The “MS” indication appears.
2. To search for the beginning of the next track,
press FF.
To search for the beginning of the current
track, press REW.
The “MS” indication flashes during scaning.
To cancel this function, press MS again.
Note
There must be at least a 4-second blank between
the tracks for this function to be activated correctiy.
Blank skip function
By using this function, when the unit detects a
blank portion longer than 12 seconds between
tracks, it automaticaily fast forwards the tape to
the beginning of the next track.
Press BL to activate this function.
The “BL” indication appears. The indication
flashes during scanning the next track.
To cancel this function, press BL again.
• If the end of the tape is reached during fast­
forwarding, the unit switches to the other side of
the tape and continues fast-forwarding.
SOUND ADJUSTMENTS
2 1
2
Press SEL to select the mode that you
wish to adjust from: VOL (volume),
BASS (bass), TRE (treble), BAL
(balance) and FAD (fader).
The following indicators appear in cyclic order.
fU0L-*-BFl55-*TRE-*-BRL--*FFCi-|
If you do not proceed with step 2 within 5
seconds, the selected mode is canceled, and
the indication returns to the current source
mode.
Press +/— to adjust the level.
Press and hold either button to change the
level rapidly.
- +
UOL
Decreases the
volume level
Increases the
volume level
BASS
Decreases the
bass level
Increases the
bass level
TRE
Decreases the
treble level
Increases the
treble level
BAL
Decreases the
level of the right
speaker(s)
Decreases the
level of the left
speaker(s)
F'AD
Decreases the
level of the front
speakers
Decreases the
level of the rear
speakers
Without selecting any mode with SEL, only
the volume level can be adjusted by pressing
+/-.
MUTE button
Press this button to temporarily lower the volume.
Press it again to restore the previous volume.
continued
ENGLISH
1 2