Setting the contrast control, Setting the beep tone – Aiwa CT-FX929M m User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING THE BEEP TONE
The unit is preset at the factory to beep each time
you press any button on the front panel except
OPEN. You can stop beeping by following the
procedure below.
SETTING THE CONTRAST
CONTROL_____________
You can change the contrast of the display.
1 With the unit off, press and hoid SEL for
more than 2 seconds.
2
Press TUNE ▼ or TUNE A repeatediy to
select “BEEP ON” or “BEEP OFF”.
3
Press SEL.
With the unit on, press and hold DRV
for more than 2 seconds.
The current contrast indication appears.
Press TUNE T or TUNE A repeatedly to
select the contrast from among the
following three levels.
1
CONT.L
:
CONT.M
(factory setting)
I
CONT.H
ENGLISH
16