Detaching and attaching the frdnt panel, Detaching and attaching the front panel – Aiwa CT-FX929M m User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

DETACHING AND

ATTACHING THE FRDNT

PANEL

1

É

You can detach the front panel from the unit and
carry it with you when you leave your car

unattended.

When you carry the front panel out of your car,

use the supplied carrying case.

1

Press and hold MUTE for more than 2

seconds to turn the unit off.

2

Press OPEN to open the front panel

and pull it out as illustrated ® - (3).

• When you leave the front panel open, do not put

anything on the panel.

• When you carry the front panel in the carrying

case, do not drop or apply mechanical shock to

the panel, and never let the panel become wet.

Attaching the front panel

1

Fit the lower side of the front panel to

its hinge pegs as illustrated ® - (

2

).

Notes

• Do not press OPEN by accident when you push

the front panel to secure it in above procedure.

• Do not touch the connector on the reverse side

of the front panel, as doing so may contaminate

the connector and cause a poor connection

resulting in a malfunction.

Security Lamp

When the front panel is detached, you can find an

LED lamp on the front side of the unit. This lamp

is designed to deter theft, and continues to flash

when the front panel is detached. This unit is not

equipped with any other security systems such
as a security alarm, so there are limitations to its
effectiveness.

LED lamp

ENGLISH

4

Advertising