Aiwa CT-FX929M m - Manual (Page 19)

SPECIFICATIONS
RADIO SECTION
(FKI)
Frequency Range: 87.5 MHz-108 MHz
(100-kHz steps)
87.5 MHz-108 MHz
(50-kHz steps)
Usable Sensitivity: 12 7dBf
50 dB Quieting Sensitivity.
17 2dBf
IF Rejection- 80 dB
Frequency Response 30 Hz-15,000 Hz
S/N Ratio- 63 dB
Stereo Separation: 35 dB at 1 kHz
Alternate Channel Selectivity:
70 dB
Capture Ratio:
(AM)
Frequency Range
Usable Sensitivity.
3dB
530 kHz-1,710 kHz
(10-kHz steps)
531 kHz-1,602 kHz
(9-kHz steps)
30 pV (30 dB)
GENERAL
Power-Supply Voltage
14.4 V (11 to 16 V allowable),
DC, negative ground
4£2
Bass ±10 dB at 100 Hz
Treble ±10 dB at 10 kHz
Preamp Output Voltage (load impedance):
4 0 V ( 1 0 k Q )
182 (W) X 53 (H) X 155 (D) mm
(7 1/4 (W) X 2 Va (H) X 6 Va (D)
inches)
Carrying case (1)
Load Impedance.
Tone Control.
Installation size
Accessory supplied:
•Specifications and external appearance are
subject to change without notice due to product
improvement.
•Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing
Corporation.
• “DOLBY” and the double-D symbol □□ are
trademarks of Dolby Laboratories Licensing
Corporation.
TAPE SECTION
Tape Speed: 4.8 cm/sec (li'/s ips)
S/N Ratio (normal) 50 dB
S/N Ratio (metal): Dolby NR off 54 dB
Dolby NR on 64 dB
Frequency Response- 40 Hz-14,000 Hz (normal)
40 Hz-16,000 Hz (metal)
Stereo Separation 40 dB
FF/REW Time: 95 sec. (C-60)
AUDIO SECTION
Max. Power Output: 40 W X 4 channels
CD/MD IN input
Input sensitivity (load impedance)
CD/MD IN: 500 mV (10 ka)
ENGLISH
1 8