ADLINK HSL-DO32-M-N/HSL-DO32-M-P - Manual (Page 54)

HSL Slave Module 41
3.1.2 Analog I/O Module
ADLINK provides M series analog I/O module.
Below is the selection guide.
3.1.3 Motion Control
ADLINK provides the HSL-4XMO-CG-N/P and HSL-4XMO-CD-N/
P remote motion control cards. Below is the selection guide.
The HSL-4XMO-CG-N/P is suitable for applications using stepper
and linear motors. For HSL-4XMO-CD-N/P, ADLINK provides the
accessories and transfer cable for direct connection to a servo
amplifier. For details, refer to the HSL-4XMO user’s manual.
Series Model
Analog
Input
Analog
Output
Slave Index
Occupation
M
HSL-AI16AO2-M-VV 16 2 2 (Leap number)
HSL-AI16AO2-M-AV 16 2 2 (Leap number)
U HSL-AO4 4 2
HSL - AIxAOx - x - XY
Discrete I/O Type:
AI16AO16: 16 analog inputs and 2 ana-
log outputs Series:
M: Daughter board
with aluminum cover
Signal Type:
X: Input signal
type, V means
voltage and A
means current.
Y: Output signal
type, V means
voltage.
HSL - 4XMO - Cx - X
Controllable Axes:
4XMO: 4-axis pulse train type motion
control
Series:
CG: The connection
interface is general
type.
CD: The connection
interface is D-sub 25.
Signal Type:
X: Output Signal
Type: NPN sink-
ing and PNP
sourcing support