ADLINK HSL-DO32-M-N/HSL-DO32-M-P - Manual (Page 72)

HSL Slave Module 59
3.4 Managing Slave Index in an HSL Network
3.4.1 Before you proceed
Before powering on the slave modules, you have to adjust the DIP
switch. For more information, refer to section 3.1.6. Take note of
the following:
1. A master controller can connect up to 63 slave indexes.
For example, the PCI-7852 has two master controllers.
Therefore, it supports a maximum 126 slave indexes.
2. The more compact the slave addresses are in an HSL
network, the greater efficiency.
3. Observe the discrete I/O and relay module rule.
4. Observe the analog I/O and thermocouple module rule.
Module
Slave Index
Occupation Transmission
Mode
Transmission
Speed
HSL-DI16DO16-M-NN/NP/PN/PP
1 (Any address)
Full Duplex (Fixed) 6 Mbps (Fixed)
HSL-DI16DO16-DB-NN/NP/PN/PP
HSL-R8DI16-M-N/P
HSL-DI8-L-N/P
HSL-DO8-L-N/P
HSL-DI4DO4-L-NN/NP/PN/PP
HSL-DI16-UL
HSL-DI16DO16-UJ/US
HSL-DI32-M-N/P
2 (Consecutive
from odd number)
HSL-DI32-DB-N/P
HSL-DO32-M-N/P
HSL-DO32-DB-N/P
Module
Slave Index
Occupation Transmission
Mode
Transmission
Speed
HSL-AI16AO2-M-VV
2 (Leap number) Full Duplex (Fixed)
3/6/12 Mbps
Selectable
HSL-AI16AO2-M-AV
HSL-AO4-U