ADLINK HSL-DO32-M-N/HSL-DO32-M-P - Manual (Page 57)

44 HSL Slave Module
3.1.5 DIP Switch Setting:
Notes
(1) The address (or slave index) 0 is reserved.
(2) The HSL-DI32-M, HSL-DO32-M, HSL-DI32-DB, and HSL-
DO32-DB require two consecutive addresses starting from
an odd number. For example, if the DIP switch is set to 3, it
occupies slave index 3 and 4.
(3) The HSL-AI16AO2-M-VV/AV requires two leap addresses at
full duplex mode. For example, if the DIP switch is set to 2,
the module occupies addresses 2 and 4.
(4) The HSL-4XMO-CG-N/P and HSL-4XMO-CD-N/P require
four leap addresses at full duplex mode. For example, if the
DIP switch is set to 2, these modules occupy 2, 4, 6, and 8.
At half duplex mode, it requires 4 consecutive addresses.