ADLINK aTCA-N700 - Manual (Page 21)

Switch Manager Configuration Guide
21
The following commands are available for ACL.
Command description
acl add <0-1> ACTION QUALIFIER Add a ACL rule.
acl clear Clear all ACL rule and init acl table.
acl delete <0-1023> Clear a specified ACL rule.
acl list actions List all ACL actions.
acl list qualifiers List all ACL qualifiers.
Example
Add an ACL rule to make all packets with source IP in the 10.10.10.0 network segment redirect to
port xe0.
4.2.16 L2 Configuration
A device maintains a MAC address table for frame forwarding. Each entry in this table indicates
the MAC address of a connected device, to which interface this device is connected and to which
VLAN the interface belongs. After adding a MAC address into the L2 table, the packets with that
MAC address can be forwarded to the destination by the L2 table directly rather than by
broadcasting.
The following commands are available for L2 configuration.
Command description
l2 add MAC_ADDR <1-4095> PORT_ID Add Ethernet MAC address to L2
table
l2 add MAC_ADDR <1-4095> PORT_ID l3
TRUE/FALSE hit TRUE/FALSE
Add Ethernet MAC address to L2
table by using L3 lookup
l2 delete MAC_ADDR <1-4095> Remove item from L2 table
l2 init Initialize layer-2 tables
ATCA-N700# acl add 0 redirectport=xe0 srcip=10.10.10.10/255.255.255.0
ATCA-N700# show acl
index priority action qualifiers......
0 0 RedirectPort=xe0 SrcIp=10.10.10.10/255.255.255.0