ADLINK aTCA-N700 - Manual (Page 8)

Switch Manager Configuration Guide
8
3 Login
After entering the LMP OS, run the Switch Manager with the command cli. First, you will enter
View Mode.
To enter Configure Mode use the command enable and password adlink. The display will not echo
the password. After entering Configure Mode successfully, the prompt will change from ">" to "#".
[root@ATCA-N700~]# cli
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
ATCA-N700>
ATCA-N700> enable
Password:
ATCA-N700#