ADLINK Express-BE - Manual (Page 55)

Express-BE Page 55
Feature Options Description
SATA Power on Port1 Enabled
Disabled SATA port Power support Enable/disable
SATA PORT- MODE GEN1
GEN2
SATA HotPlug Port1 Enabled
Disabled SATA Hot-Plug function
SATA Port2 Info only
eSATA PORT on Port2 Enabled
Disabled SATA port 2 support eSATA Enable/disable
SATA Power on Port2 Enabled
Disabled SATA port Power support Enable/disable
SATA PORT- MODE GEN1
GEN2
SATA HotPlug Port2 Enabled
Disabled SATA Hot-Plug function
SATA Port3 Info only
eSATA PORT on Port3 Enabled
Disabled SATA port 3 support eSATA Enable/disable
SATA Power on Port3 Enabled
Disabled SATA port Power support Enable/disable
SATA PORT- MODE GEN1
GEN2
SATA HotPlug Port3 Enabled
Disabled SATA Hot-Plug function
7.3.5. USB
Feature Options Description
USB Info only
USB Module Version Info only
USB Devices Info only Drives, keyboards, mouse, hubs
Legacy USB Support Enabled
Disabled
Auto Enables legacy USB support.
Auto option disables legacy support if no USB devices are
connected.
Disable option will keep USB devices available only for EFI
applications and setup.
XHCI Hand-off Enabled
Disabled This is a workaround for OSes without XHCI hand-off support. The
XHCI ownership change should be claimed by the XHCI OS driver.
EHCI Hand-off Enabled
Disabled This is a workaround for OSes without EHCI hand-off support. The
EHCI ownership change should be claimed by the EHCI OS driver.
USB Mass Storage Driver Support Enabled
Disabled Enable/Disable USB mass storage driver support.
SB USB Configuration Submenu
USB hardware delays and time-outs: Info only