ADLINK Express-BE - Manual (Page 56)

Page 56 Express-BE
Feature Options Description
USB transfer time-out 1 sec
5 sec
10 sec
20 sec The time-out value for control, bulk, and interrupt transfers
Device reset time-out 10 sec
20 sec
30 sec
40 sec USB mass storage device Start Unit command time-out.
Device power-up delay Auto
Manual Maximum time the device will take before it properly reports itself to
the Host Controller. 'Auto' uses default value: for a Root port it is 100
ms, for a Hub port the delay is taken from Hub descriptor.
Mass Storage Devices Info only List current USB mass storage devices.
7.3.5.1. USB > SB USB Configuration
Feature Options Description
XHCI Controller 0 Enabled
Disabled XHCI Controller 0 Enable
XHCI0 Port 0 Enabled
Disabled
XHCI0 Port 1 Enabled
Disabled
XHCI Controller 1 Enabled
Disabled XHCI Controller 1 Enable
XHCI1 Port 0 Enabled
Disabled
XHCI1 Port 1 Enabled
Disabled
OHCI HC(Bus 0 Dev 18 Fn 0) Enabled
Disabled
EHCI HC(Bus 0 Dev 18 Fn 2) Enabled
Disabled
USB Port 0 Enabled
Disabled
USB Port 1 Enabled
Disabled
USB Port 2 Enabled
Disabled
USB Port 3 Enabled
Disabled
USB Port 4 Enabled
Disabled