ADLINK MXC-6000 Series - Manual (Page 40)

28 Introduction
1.7.1 Clear CMOS Jumper
Upon encountering an abnormal condition preventing the
MXC-6000 series from booting, the jumper can clear the BIOS
content stored in CMOS and restore default settings. To clear
CMOS, short pin #2 to pin #3 of JP1 and then return to normal
mode (short pin #1 to pin #2).
Table 1-15: Clear CMOS Jumper Settings
1.7.2 Internal Reserved +5V and +12V Connector
The MXC-6000 series controller provides one power pin header
with +5V and +12V DC power, providing access for PCI and PCI
express card external power supplies..
Table 1-16: +5V and +12V Connector Pin Functions
Normal Clear
PIN Signal
1 +5V
2 GND
3 GND
4 +12V
1