ADLINK MXC-6000 Series - Manual (Page 76)

64 BIOS Setup
Quiet Boot
Bootup Num-Lock State
Set this value to allow the Number Lock setting to be modified dur-
ing boot.
B.5.2 Boot Option Priorities
Specifies the priority of boot devices. All installed boot devices are
detected during POST and displayed on the screen.Boot Option
Priorities.
B.6 Exit
Save Changes and Exit
When BIOS settings are complete, select this option to save all
changes and reboot the system for the new settings to take effect.
Discard Changes and Exit
Select this option to discard all changes and exit BIOS setup.
Discard Changes and Reset
Resets system setup without saving any changes.
Restore Defaults
Select this option to set all BIOS options to default settings. The
Default setting is designed for maximum system stability, but not
maximum performance. Select the Restore Defaults Setup options
if the computer encounters system configuration problems.
Launch EFI Shell from Filesystem Device
Attempts to launch EFI Shell application (Shellx64.efi) from one of
the available filesystem devices.
Option Description
Disabled Directs BIOS to display the POST messages
Enabled Directs BIOS to display the OEM logo