ADLINK MXC-6000 Series - Manual (Page 65)

Driver Installation 53
MXC-6000
For Microsoft Windows 7and XP users:
1. Close any running applications.
2. Insert the ADLINK All-in-One DVD. The Ethernet driver
is located in the directory
x:\Driver Installation\Matrix\MXC-6000\LAN-Realtek\
where x: denotes the DVD-ROM drive.
3. Execute setup.exe and follow onscreen instructions to
complete the setup.
4. After installation is complete, reboot the system.
3.4 Installing the audio driver
This section describes installation of the audio driver for the
MXC-6000 series. The MXC-6000 series controller supports High
Definition audio using the Realtek ALC262 audio codec. To install
the audio driver for the MXC-6000 series controller for Microsoft
Windows 7 and XP users:
1. Close any running applications.
2. Insert the ADLINK All-in-One DVD. The audio driver is
located in the directory
x:\Driver Installation\Matrix\MXC-6000\Audio\
where x: denotes the DVD-ROM drive.
3. Execute Setup.exe and follow onscreen instructions to
complete the setup.
4. After installation is complete, reboot the system.
3.5 Installing the WDT driver
A WDT (watchdog timer) is a hardware mechanism resetting the
system when the operating system or application is halted. A typi-
cal usage of WDT is to start the timers and periodically reset the
timer, and when timer is expired, the system resets. The WDT
driver must be installed to program the WDT.