ADLINK MXC-6000 Series - Manual (Page 57)

Getting Started 45
MXC-6000
external storage device.
2.6 Connecting DC Power
The DC power input connector of the MXC-6000 series controller
has V+, V- , and chassis ground pins, and accepts input voltage as
shown previously. Connect DC power as shown. Two screws fas-
ten to secure the plug.
WARNING:
Before connecting DC power to the MXC-6000 series control-
ler, ensure voltage and polarity are compliant with the DC
input. Improper input voltage or polarity can cause system
damage.