Advanced Control Technologies Specs Instructions ZTH110 (RF Controller, HandheldLED Indicator, 908.42MHz) - Manual (Page 20)

ZTH100 Operating Instructions (Version 1.26)
033005 HomePro
by ADVANCED CONTROL TECHNOLOGIES, INC.
20
Considerations:
1. It is important to note that all information on the receiving controller will be deleted before any information
is received.
2. Burglar deterrent and timer information is not copied to the secondary controller.
3. Slave Wireless Controllers cannot be used to add newly acquired or reset modules to the network.
4. If a secondary controller is added as one of the first 64 units, it will take up a module ID thus diminishing
the number of units by one that can be controlled from the master controller.
5. If modules are moved physically it should be done as mentioned in 4.6.5 and the replication should be
repeated.
6. New modules added to the network by the Master Wireless Controller are not automatically known by a
secondary wireless controller. They have to be transferred from the Master Controller by the replication
process.
4.6.5.1 SEND INFORMATION TO ANOTHER WIRELESS CONTROLLER
There are two options. If the user wants an exact copy of the master controller including groups, scenes, names and
so forth, “Identical copy” should be selected. If the user wants to create groups, scenes and names from scratch “Only
system information” should be selected. When sending is activated the master controller will wait for a secondary
controller to respond to its module information broadcast.