Amplicom PowerTel 720 Cordless Phone w/Answering Machine - Manual (Page 10)

Set Up
Note: The Amplicom customer service toll free number has been pre-installed in
the phone book of every telephone and cannot be edited or removed.
1. Connect the base
i. Plug the power adapter into the base unit and the other end into a
wall socket. The unit should power on and the display will light up.
ii. Plug the telephone cable into the base unit
2. Connect the cordless phone charger base
(Optional if included)
Plug the other power adapter that is already attached to charger base into the wall
socket and switch the power on.
3. Install the battery pack
Insert the rechargeable battery pack into the handset as shown.
Dispose of battery pack properly. Do not allow battery pack to come into contact with fire or
water.
4. Charge the handset
Place the handset on its base to charge for a minimum of 16 hours before use.
5. Connect telephone cable
After initial charge, plug the telephone cable into the telephone wall socket.
YOUR POWERTEL PHONE IS NOW READY TO USE!
WARNING: Do not connect phone line to the phone socket yet.
Service Center 10
S
et UP