Set the answer mode, Check the outgoing message, Record an outgoing message – Amplicom PowerTel 720 Cordless Phone w/Answering Machine User Manual
Page 13
CID/FLASH
OGM MEMO
CID/FLASH
OGM MEMO
REDIAL/P
OGM MEMO
TONE
CID
INT
FLASH
TONE
CID
INT
FLASH
REDIAL
INT
FLASH
Set the answer mode
Choose the answer mode: Answer & Record, Answer only or Answer off. With
the machine in Answer only mode callers will not be able to leave a message.
1. Press
to switch the answering machine on.
2. To change the mode between Answer & Record, Answer Only or
Answer Off, press and hold
for two seconds.
Check the outgoing message
Press
to hear the current outgoing message.
Record an outgoing message
The outgoing message must be less than two minutes long. To change the
default answering message:
1. Press and hold
on the base for two seconds. Record the new message
after the beep. The base message counter will display during recording.
2. To stop recording, press
. The new message will be played back, and
the base message counter will display .
while the
Note: to return to the default message, press and hold
outgoing message is playing.
DELETE
1-866-AMPLICOM (267-5426)
13
A
NSWERING
M
ACHINE