Amplicom PowerTel 720 Cordless Phone w/Answering Machine - Manual (Page 18)

Change PIN
1. Press and hold (located underneath the base) for two seconds. The
current 3 digit PIN will be announced and the fi rst new digit requested. Enter
a digit between 0 and 9.
2. or , the digits will also be shown on the Select the new fi rst digit using
base message counter. Press
to confi rm.
3. Repeat the above procedure for the 2nd and 3rd new digits.
4. After the 3rd digit has been confi rmed, the new PIN will be announced.
Press at any time to exit the Change PIN code mode and return to stand-
by. The PIN code will remain unchanged.
Call in to check messages
1. Dial the system’s phone number from a remote phone and wait until the
answering machine picks up the call.
2. Press twice, then enter the 3 digit PIN after the voice prompt.
3. Refer to the next section, “Manage messages from another phone” for
additional instructions.
A
NSWERING
M
ACHINE
Service Center 18